Optima g200 用户指南

The RJ-45 jack is used to connect the internal Fast Ethernet (10/100 Base-T/Tx) to a
Local Area Network (LAN) in your office or home, or broadband devices such as a
cable modem, DSL, or satellite internet. If your notebook has been configured with
internal LAN capability you will need to configure your notebook to work with your
particular network. (To properly set up your LAN environment, consult with a network-
ing professional. Please refer to your network administrator for information on your
network configuration.)
To connect the LAN cable follow these easy steps:

1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
3. Plug the other end of the cable into a LAN outlet.

The 1394 port allows you to connect digital devices that are compliant with IEEE 1394
standard. The IEEE 1394 standard is easy to use, connect, and disconnect. This port
can allow up to 400 Mbps transfer rate. A third-party application is required to operate
your digital device with the 1394 port.
In order to connect a 1394 device, follow these steps:

1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.

The two Universal Serial Bus ports (USB) allow you to connect USB devices such as
external game pads, pointing devices, keyboards and/or speakers. In order to connect a
USB device follow these easy steps:

1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.

Due to the ongoing changes in USB technology and standards,
not all USB devices and/or drivers are guaranteed to work.