Konica Minolta Z6 说明手册

The setup menu is used to control the camera’s functions and operation. The navigating the setup
menu section covers the operation of the menu. The section is followed by detailed descriptions of
the settings.

It is possible to view camera images on your television. The camera has a video-out terminal to make
the connection using the supplied AV cable. The camera is compatible with the NTSC and PAL stan-
dards. The video-output setting can be checked and set in section 4 of the setup menu (p. 98).

SETUP MENU

1. Turn off the television and the camera.

2. Open the terminal cover and insert the small plug of the

AV cable into the camera’s AV-out terminal. The arrow on
the plug should face the back of the camera.

3. Plug the other end of the AV cable into the video and

audio input terminals on the television. The yellow plug is
for the video output. The white plug is for the monaural
audio output.

4. Turn the television on.

5. Change the television to the video channel.

6. Turn the camera’s mode dial to the playback position and

turn on the camera. The camera’s monitors will not acti-
vate when the camera is attached to a television. The
playback-mode display will be visible on the television
screen.

7. View images as described in the playback section.

Setup menu

The setup menu is opened from the other menus. It can be accessed from any of the recording or
playback menus.

Press the central button of the controller to open the
setup menu.

Use the right key of the controller to highlight setup
tab at the top of the menu. 

Reverse the procedure to return to the original
menu. Pressing the menu button closes the menu
and returns to the recording or playback modes.