Konica Minolta 1680mf 用户指南
Understanding the Media Path
9-5
Understanding the Media Path
Understanding the media path will help you locate media misfeeds.
1. Output tray
2. Imaging cartridge
3. Toner cartridge carousel
4. Tray 1 (Multipurpose tray)
5. Fuser unit
1. Output tray
2. Imaging cartridge
3. Toner cartridge carousel
4. Tray 1 (Multipurpose tray)
5. Fuser unit
Clearing Media Misfeeds
To avoid damage, always remove misfed media gently, without tearing it. Any
piece of media left in the machine, whether large or small, can obstruct the
media path and cause further misfeeds. Do not reload media that has misfed.
piece of media left in the machine, whether large or small, can obstruct the
media path and cause further misfeeds. Do not reload media that has misfed.
Note
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the machine.
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the machine.
CAUTION
Unfused toner can mess your hands, clothes, or anything else it gets
on.
If you accidentally get toner on your clothes, lightly dust them off as
best as you can. If some toner remains on your clothes, use cool, not
hot water, to rinse the toner off. If toner gets on your skin, wash it off
with cool water and a mild soap.
on.
If you accidentally get toner on your clothes, lightly dust them off as
best as you can. If some toner remains on your clothes, use cool, not
hot water, to rinse the toner off. If toner gets on your skin, wash it off
with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
and consult a doctor.
If, after clearing the media misfeed, the misfeed message in the message
window persists, open and close the scanner unit. This should clear the mis-
feed message.
window persists, open and close the scanner unit. This should clear the mis-
feed message.
1
5
2
3
4
Media path