Konica Minolta 1680mf 用户指南

Print Media

3-4

„

Layered 

„

Adhesive

„

Folded, creased, curled, embossed, warped, or wrinkled

„

Perforated, three-hole punched, or torn 

„

Too slick, too coarse, or too textured 

„

Different in texture (roughness) on the front and back

„

Too thin or too thick

„

Stuck together with static electricity

„

Composed of foil or gilt; too luminous

„

Heat sensitive or cannot withstand the fusing temperature (180°C 
[356°F])

„

Irregularly shaped (not rectangular or not cut at right angles)

„

Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

„

Acidic 

„

Any other media that is not approved

Paper thicker than 90 g/m

2

 (24 lb bond) is referred to as thick stock. Test all 

thick stock to ensure acceptable performance and to ensure that the image 
does not shift.
You can print continuously with thick stock. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and print one sheet at a time.

DO NOT use thick stock that is
„

Mixed with any other media in the trays (as this will cause media misfeed-
ing)

Up to 50 sheets, depending on their thick-
ness

Orientation Face up
Driver 
Media Type

Thick Stock 1

Thick Stock 2

Thick Stock 1: 91 to 163 g/m

2

 (25 to 43.5 lb bond)

Thick Stock 2: 164 to 209 g/m

2

 (43.6 to 55.6 lb bond)