Hitachi DZ-MV580A 用户手册

下载
页码 187
English
71
123
Manually Focusing Subject
The DVD video camera/recorder usually focuses on a subject automatically (autofocus). You can also 
manually focus a subject depending on the recording conditions.
FOCUSING DURING RECORDING
Normally, the DVD video camera/recorder automatically focuses the subject (auto-focus), but you can 
also manually focus a subject, depending on the recording conditions (manual focus).
Focusing range
You can switch the display mode of on-screen information:
On T (tele) side: approximately 3.6 feet (1 m) from lens surface to infinity
On W (wide) side: approximately 13/16" (2 cm) from lens surface to infinity
1
Press the FOCUS button during recording.
“MF” will appear on the screen.
2
Press the zoom lever down to “T” control side to 
zoom in on subject.
3
Use the S R buttons to adjust the focus, while 
viewing the image in the viewfinder or on the 
LCD screen.
Note
:
Pressing FOCUS will alternate between manual focus 
and auto focus. With auto focus, no indication will appear 
on the screen.
Be sure to zoom in on your subject before manually 
focusing on it. If you bring the subject into focus at the 
“W” control side, focus will be faulty when you turn the 
zoom lever to the “T” control side to zoom in on the 
subject.
Manual focus is released when the DVD video camera/
recorder is turned off. When you turn the DVD video 
camera/recorder on next time, auto focus will be 
restored.
8 : 0 0 AM
9 / 3 0 / 2 0 0 4
3 0 MIN
0 : 0 0 : 0 0
REM
FINE
Manual Focus icon
Adjust with 
S
 and 
R
buttons