Hitachi DZ-MV780A 业主指南

下载
页码 190
English
47
REMOVING DISC
1
Press down the DISC 
EJECT button once and 
release it.
In a moment, the cover 
of disc insertion block 
will open.
If the DVD video 
camera/recorder is on 
at this time, the 
“EJECT” indicator will blink on the LCD 
monitor or in the viewfinder.
2
Gently open the cover 
fully until it stops.
3
Remove the disc.
While pushing down the center portion of 
turntable, pick up the disc, holding its edge, 
to remove it.
4
Gently push the section 
indicated “PUSH CLOSE” 
on the cover of disc 
insertion block, to close the 
cover.
Note
:
• Do not remove the battery or disconnect the AC 
adapter/charger during removal of the disc or until 
power is completely turned off: If you do, the disc 
cover will not open. If this happens, reattach the 
battery or AC adapter/charger, push down the DISC 
EJECT button once, and then release it.
• Do not insert anything other than the 8 cm DVD-RAM 
or DVD-R disc into the disc insertion block: Doing so 
could cause malfunctions.
• When inserting or removing the disc, BE SURE NOT 
to look into the lens in laser pickup: Doing so could 
damage your eyesight.
• If the battery remaining level runs out, set the power 
switch to “OFF” to remove the disc (see page 42).
DISC EJECT
Turntable