Hitachi 22gxp 安装指导
8
•
Leave the jumpers as set. The jumpers are factory set to Master, 16 heads.
Note: The IBM Deskstar has an option jumper block located next to the interface connector.
Setting these jumpers allows you to use the different options of the hard disk drive. See the
“Jumpers” section of the Appendix for jumper setting descriptions.
Setting these jumpers allows you to use the different options of the hard disk drive. See the
“Jumpers” section of the Appendix for jumper setting descriptions.
Attach the cables
Note: With some system chassis, it may be more convenient to attach the cable after the drive is
mounted. The order of the steps below may change depending upon your system.
mounted. The order of the steps below may change depending upon your system.
Note: The 40 pin, 80 conductor ATA/IDE cable provided with the IBM Deskstar is color coded for
the master, slave, and system connectors. The Master connector is black, the Slave connector is
gray, and the system connector is blue.
the master, slave, and system connectors. The Master connector is black, the Slave connector is
gray, and the system connector is blue.