Hitachi 22gxp 安装指导
24
When you see the Finished dialog box the installation is complete.
12. Select
Exit to close Disk Manager 2000 and start using your new disk drive.
Important: If the Ontrack Dynamic Drive Overlay (DDO) was installed during the installation, you must allow
DDO to load in memory prior to booting to a floppy. If you do not perform the floppy boot process below,
your drive’s capacity and partitions will be unavailable.
DDO to load in memory prior to booting to a floppy. If you do not perform the floppy boot process below,
your drive’s capacity and partitions will be unavailable.
1.
Boot from the hard disk drive.
2.
Let DDO load into memory. Follow the messages displayed on your system’s monitor.
Starting ONTRACK…
Press spacebar to boot from diskette…
3.
Press the spacebar. The following message is displayed.
Insert boot diskette in drive A:, press spacebar when ready…
4.
Insert the boot diskette in the A: drive.
5.
Press the spacebar to boot from the floppy.