Hitachi 15k147 安装指导
Page 1
version 1.0
Quick Installation Guide
Hitachi Ultrastar 15K147
Hitachi Ultrastar 15K147
Models:
H
H
U
U
S
S
1
1
5
5
1
1
4
4
1
1
4
4
V
V
L
L
3
3
6
6
0
0
0
0
H
H
U
U
S
S
1
1
5
5
1
1
4
4
1
1
4
4
V
V
L
L
3
3
8
8
0
0
0
0
H
H
U
U
S
S
1
1
5
5
1
1
4
4
7
7
3
3
V
V
L
L
3
3
6
6
0
0
0
0
H
H
U
U
S
S
1
1
5
5
1
1
4
4
7
7
3
3
V
V
L
L
3
3
8
8
0
0
0
0
H
H
U
U
S
S
1
1
5
5
1
1
4
4
3
3
6
6
V
V
L
L
3
3
6
6
0
0
0
0
H
H
U
U
S
S
1
1
5
5
1
1
4
4
3
3
6
6
V
V
L
L
3
3
8
8
0
0
0
0
HANDLING
P
RECAUTIONS
• Do not open the electrostatic discharge (ESD) bag containing the drive until required.
• Do not apply pressure on the drive during handling and installation.
• To prevent damage from impact or vibration always set the drive down gently.
• Handle the drive carefully by the edges. Do not touch the exposed printed circuit board or any electronic
components.
• Do not cover the breather hole! Covering the breather hole may result in loss of data.
• Save the packaging materials including the ESD bag in the event that the drive must be returned.
INSTALLING THE DRIVE
1. Record the serial number and part number of your hard drive for future reference.
2. Turn off the computer and remove the computer system cover.
3. Before handling the hard disk drive, discharge any static electricity from yourself and your clothing. With
2. Turn off the computer and remove the computer system cover.
3. Before handling the hard disk drive, discharge any static electricity from yourself and your clothing. With
one hand touch an unpainted metal surface on the computer chassis, and then touch the ESD bag with the
other hand for a minimum of two seconds.
other hand for a minimum of two seconds.
4. Remove the hard drive from the ESD bag.
5. Unplug the computer.
6. For the 68-pin model assign a SCSI ID address if necessary. The default ID is 6.
5. Unplug the computer.
6. For the 68-pin model assign a SCSI ID address if necessary. The default ID is 6.