Hitachi c10k147 安装指导
Hitachi Global Storage Technologies
Page 3
version 1.0
Mounting Recommendations
•
Do not push on the striped area marked in the above image. Pressure on the striped area could cause contact between
the cover and movable parts inside the hard drive.
the cover and movable parts inside the hard drive.
•
Do not put a steel plate over the ‘Red Box’ area marked in the above image. If using a steel plate on the hard drive
cover side, 2mm of space is required between the plate and the drive to ensure airflow.
cover side, 2mm of space is required between the plate and the drive to ensure airflow.
•
The blue dotted lines in the above image represent the area in which shock drop insulation should be applied.
•
The blue frame shown below represents the casing used if the drive can not be secured with screws.
•
Hitachi Global Storage Technologies will assist customers with mounting design
.