Hitachi ut32x802 用户指南

43

Using a wide-screen monitor

 The monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain 

software, such as a TV program, the image would appear different from the original. Take this into consideration 

when making screen mode choices.

 Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for commercial 

or public viewing purposes could infringe on the copyright holder’s rights, which are protected by Copyright Law.

 When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the 

peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image 

reflecting the original intention.

FUNCTION (continued)

Aspect Switching (continued)

HDMI/Composite Signal Input (continued)

 Position Adjustment

Vertical picture position can be adjusted for 

Panoramic 1, Zoom 1 and Zoom 2 mode as follows.

1. Press the 

◄► 

 button while operating the picture aspect display.

2. “Position” display will appear.
3. Adjust the position using the 

◄► 

 button.

The adjustment ranges of each picture aspect are as shown below.

Display Aspect

Adjustable Range

-12~+12

Zoom 1, Zoom 2

-31~+31

RGB Signal Input

  Display Aspect

 

You can select a suitable aspect depending on the resolution.

Normal 

Full 

Real*

Display Area Selection Diagram

Press▲

Press▼

Resolution

Input signal

Full display

Circular display

Display

Full

Normal

Real*

640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
1280 X 1024 (SXGA)

640 X 400 (VGA)
1280 X 768 (WXGA)
1360 X 768 (WXGA)

*  Real mode gives the image with same shapes as that of a 

computer monitor (neither compression nor stretching).This 

mode is not available if the input signal is 1280 x 1024 (SXGA).