Clavia electro 2 用户指南
5. Panel reference: System functions
NORD ELECTRO 2 V3.0x
Page 34
MIDI C
H
Press the S
HIFT
+ P
ROGRAM
1 (MIDI CH) buttons to en-
ter the MIDI Channel function. Here you set the MIDI
Channel for the Nord Electro 2 to send and respond to. Select
MIDI Channel with the U
Channel for the Nord Electro 2 to send and respond to. Select
MIDI Channel with the U
P
/D
OWN
N
AVIGATOR
buttons.
Press any button (except for the S
HIFT
, S
TORE
or U
P
/
D
OWN
buttons) to exit.
Range: 1-16, -- (off)
Note: If the MIDI CH and LOWER CH (see below)
are set to the same number, incoming MIDI notes will
produce a layered sound of the Upper Manual and
Lower Manual sounds together. This is normally not
what you want, so keep the channels separated from
each other.
are set to the same number, incoming MIDI notes will
produce a layered sound of the Upper Manual and
Lower Manual sounds together. This is normally not
what you want, so keep the channels separated from
each other.
L
OWER
C
H
Press the S
HIFT
+ P
ROGRAM
2 (LOWER CH) buttons to
enter the Lower MIDI Channel function. Here you set the
MIDI channel for the Lower Manual of Nord Electro 2 Organ
section to respond to. Select Lower MIDI Channel with the
U
MIDI channel for the Lower Manual of Nord Electro 2 Organ
section to respond to. Select Lower MIDI Channel with the
U
P
/D
OWN
N
AVIGATOR
buttons. Press any button (except
for the S
HIFT
, S
TORE
or U
P
/D
OWN
buttons) to exit. See
for more details on how to use an external “Lower
Manual” MIDI keyboard.
Range: 1-16, -- (off)
Range: 1-16, -- (off)
Note: If the LOWER CH and MIDI CH (see above)
are set to the same number, incoming MIDI notes will
produce a layered sound of the Upper Manual and
Lower Manual sounds together. This is normally not what you want, so keep the channels sep-
arated from each other.
are set to the same number, incoming MIDI notes will
produce a layered sound of the Upper Manual and
Lower Manual sounds together. This is normally not what you want, so keep the channels sep-
arated from each other.
L
OCAL
Press the S
HIFT
+ P
ROGRAM
3 (LOCAL) buttons to enter
the MIDI Local on/off function. Here you set whether the
Nord Electro 2 keyboard and front panel controls should con-
trol internal Programs or only send MIDI. Local On is the
normal “play mode”. In Local Off mode, the front panel and
keyboard actions are transmitted via MIDI only and does not
control the internal sound(s) at all. (The MIDI In works as
usual, though.)
Nord Electro 2 keyboard and front panel controls should con-
trol internal Programs or only send MIDI. Local On is the
normal “play mode”. In Local Off mode, the front panel and
keyboard actions are transmitted via MIDI only and does not
control the internal sound(s) at all. (The MIDI In works as
usual, though.)
Local Off should be used when you use a sequencer to record
and play back from Nord Electro 2. When using a sequencer,
you connect the MIDI Out of Nord Electro 2 to the sequenc-
er’s MIDI In. Then, from the sequencer’s MIDI Out back to
and play back from Nord Electro 2. When using a sequencer,
you connect the MIDI Out of Nord Electro 2 to the sequenc-
er’s MIDI In. Then, from the sequencer’s MIDI Out back to