Canon DC220 说明手册
Getting Started
Pre
p
p
ar
ati
on
s
on
s
23
Preparations
Getting Started
Getting Started
Charging the Battery Pack
The camcorder can be powered with a
battery pack or directly using the compact
power adapter. Charge the battery pack
before use.
battery pack or directly using the compact
power adapter. Charge the battery pack
before use.
1
Turn off the camcorder.
2
Attach the battery pack to the
camcorder.
• Open the LCD panel.
• Slide in the connector end of the
battery in the direction of the arrow and
press it gently until it clicks.
camcorder.
• Open the LCD panel.
• Slide in the connector end of the
battery in the direction of the arrow and
press it gently until it clicks.
3
Connect the power cord to the
compact power adapter.
compact power adapter.
4
Plug the power cord into a power
outlet.
outlet.
5
Connect the compact power adapter
to the camcorder’s DC IN terminal.
• The CHG (charge) indicator starts
flashing. The indicator will stay on
when the charging is completed.
• You can also use the compact power
adapter without attaching a battery
pack.
• When the compact power adapter is
connected, even if a battery is
attached its power will not be
consumed.
to the camcorder’s DC IN terminal.
• The CHG (charge) indicator starts
flashing. The indicator will stay on
when the charging is completed.
• You can also use the compact power
adapter without attaching a battery
pack.
• When the compact power adapter is
connected, even if a battery is
attached its power will not be
consumed.
O
NCE
THE
BATTERY
IS
FULLY
CHARGED
1
Disconnect the compact power
adapter from the camcorder.
adapter from the camcorder.
2
Unplug the power cord from the
power outlet and the compact
power adapter.
power outlet and the compact
power adapter.
Getting Started
BATT. switch
BATT. switch
DC IN terminal
CHG
(charge)
indicator
(charge)
indicator
D119_NTSC-E.book Page 23 Monday, December 18, 2006 10:14 AM