Canon DC220 说明手册
Menu Options Lists
50
System Setup (Volume, Beep, Media Select , etc.)
SYSTEM SETUP
[
CARD], [
DISC]
[
ON], [
OFF
]
Allows the camcorder to be operated with
the wireless controller.
the wireless controller.
[
HIGH VOLUME],
[
LOW VOLUME], [
OFF]
A beep will accompany some operations
like turning on the camcorder, the self-
timer countdown, etc. It also serves as a
warning beep under unusual conditions.
like turning on the camcorder, the self-
timer countdown, etc. It also serves as a
warning beep under unusual conditions.
[
ON], [
OFF]
In order to save power when the
camcorder is powered by a battery pack,
it will automatically shut off if left without
any operation for 5 minutes.
camcorder is powered by a battery pack,
it will automatically shut off if left without
any operation for 5 minutes.
Approximately 30 seconds before the
camcorder shuts off, the message
“
“
AUTO POWER OFF” will appear.
In Quick-Start ready mode, the
camcorder will shut off after the time
selected for the [
selected for the [
STANDBY OFF]
setting.
[
10 min], [
20 min],
[
30 min]
Select the length of time after which the
camcorder will end the Quick-Start ready
mode and shut off automatically.
camcorder will end the Quick-Start ready
mode and shut off automatically.
[
RESET], [
CONTINUOUS]
Select the image numbering method to be
used on a new memory card or disc.
Images are automatically assigned
consecutive image numbers from 0101 to
9900, and stored in folders containing up
to 100 images. Folders are numbered
from 101 to 998.
[
used on a new memory card or disc.
Images are automatically assigned
consecutive image numbers from 0101 to
9900, and stored in folders containing up
to 100 images. Folders are numbered
from 101 to 998.
[
RESET]: Image numbers will restart
from 101-0101 every time you insert a
new memory card or disc.
[
new memory card or disc.
[
CONTINUOUS]: Image numbers will
continue from the number following that
of the last image recorded with the
camcorder.
of the last image recorded with the
camcorder.
If the recording media you insert
already contains an image with a larger
number, a new image will be assigned a
number one higher than that of the last
image on the memory card or disc.
number, a new image will be assigned a
number one higher than that of the last
image on the memory card or disc.
We recommend using the
[
CONTINUOUS] setting.
The setting is common to the memory
card and the disc.
MEDIA SEL.
(
37)
WL.REMOTE
VOLUME
(
40)
BEEP
POWER SAVE
STANDBY OFF
(
38)
FILE NOS.
D119_NTSC-E.book Page 50 Monday, December 18, 2006 10:14 AM