Canon G9 用户指南
Shooting Using the Mode Dial
104
3
Shoot.
• Pressing the shutter button halfway automatically sets the
exposure, focus and white balance settings.
• Pressing the shutter button fully starts recording video and
sound simultaneously.
• During shooting, the recording time and [z Rec] appear on the
LCD monitor. The indicator will blink green in
mode.
• Pressing the shutter button fully again stops recording.
Recording will stop automatically under the following
circumstances.
- When the maximum recording time elapses
- When the built-in memory or memory card becomes full
circumstances.
- When the maximum recording time elapses
- When the built-in memory or memory card becomes full
• The elapsed time from the start of recording to the finish will
display on the LCD monitor when playing back a
recording,
but the actual playback time will be shorter than the displayed
time.
time.
z
You are recommended to use a memory card that has been
formatted in your camera to shoot movies (p. 69). The card
supplied with the camera may be used without further
formatting.
formatted in your camera to shoot movies (p. 69). The card
supplied with the camera may be used without further
formatting.
z
Be careful of the following while recording.
- Try not to touch the microphone (p. 42).
- If you press a button, the sound of the button being
- Try not to touch the microphone (p. 42).
- If you press a button, the sound of the button being
pressed will also be recorded.
- The camera will automatically adjust the exposure and
white balance to suit the shooting conditions during a
recording. Please note, however, that the sounds made by
the camera while automatically adjusting the exposure
may also be recorded.
recording. Please note, however, that the sounds made by
the camera while automatically adjusting the exposure
may also be recorded.
z
The focus and optical zoom settings remain fixed for
subsequent frames at the values selected for the first frame.
subsequent frames at the values selected for the first frame.