Canon IPF650 用户指南

12

Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it 
may cause feeding problems and affect the printing quality.

•

Align the edges of the paper on both ends of the roll. Misalignment 
may cause feeding problems.

•

For details on supported sizes and types of rolls, see " Paper Sizes " or the  Paper Reference Guide   .

•

Be careful not to cut through any barcodes printed on the roll.

To view instructions as you attach the  Roll Holder   , press the  Navigate    button.

•

 (→"Paper Sizes," User Manual) ,  (→"Types of Paper," User Manual) 

Set the roll on a table or other fl at surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may 
cause injury.

•

When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We recommend 
wearing clean cloth gloves when handling rolls to protect the printing surface.

•

When printing on rolls, attach the  Roll Holder    to the roll.

Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes 
equipped with the  2-Inch Paper Core Attachment    installed.

Using rolls with a 2-inch paper core

•

Using rolls with a 3-inch paper core

•

 2-Inch Paper Core Attachment    (a)

 3-Inch Paper Core Attachment R    (c)

 3-Inch Paper Core Attachment L    (b)

Lift the  Holder Stopper    lever (a) from the shaft side to 
unlock it. Holding the  Holder Stopper    at the position 
indicated (b), remove it from the  Roll Holder   .

Attach the roll holder to rolls as follows.

a

c

b

a

b