Canon MP360 软件指南
78
X Scanning an image from an application
You can scan an image from a TWAIN or WIA-compliant application and use the image in that
application. This procedure varies depending on the application. The following is only one
example. For the detailed procedure, refer to the documentation of the application you are using.
application. This procedure varies depending on the application. The following is only one
example. For the detailed procedure, refer to the documentation of the application you are using.
1
Place the document face-down on the platen glass.
2
In the application, click the command to scan a document ([Import], [Acquire image]
etc.).
etc.).
3
Select the scanner driver.
Windows XP: You can use the ScanGear MP or the WIA driver as the scanner driver.
– To use ScanGear MP, select [Canon MP370], [Canon MP360], or [Canon MP390].
– To use the WIA driver, select [WIA Canon MP370], [WIA Canon MP360], or [WIA Canon MP390].
– To use the WIA driver, select [WIA Canon MP370], [WIA Canon MP360], or [WIA Canon MP390].
4
If necessary, in the scanner driver dialog box, preview the scan and make adjustments.
5
Click [Scan].
When scanning is completed, the scanned image will appear in the application’s display area.
FWsoft-E.book Page 78 Friday, October 17, 2003 2:01 PM