Canon MP560 补充手册
0
1
2
3
4
5
6
Action
<Default State>
Wireless connection
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically
Select
Reset LAN settings, then press the OK button.
Select
LAN settings, then press the OK button.
Select
Device settings, then press the OK button.
Use the Easy-Scroll Wheel to select
Settings, then
press the
OK button.
Make sure that the screen shown to the right appears.
After a while, the
LAN settings screen returns.
•
Select
Yes, then press the OK button.
The LAN setting of the machine is now restored to the default state.
Restoring the Machine's Default LAN Settings to Perform Setup Again
Follow the procedure below to restore LAN settings of the machine to the default state.
Perform setup again by following the procedures in "Wireless Setup" on page 19 and onward in
the printed manual:
Getting Started.
•