Canon i320 快速安装指南

Connect one end of a USB cable (not  
included) to the computer, the other to  
the printer.

IMPORTANT: 

IS OFF, or the computer will attempt  
to install the printer driver before  
the printer is ready.

Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet.

USB Port

USB Cable

Protective cap

Remove the black ink tank (BCI-24 Black) 
from its packaging and pull off the orange  
protective cap.

NOTE: To avoid spilling ink, do not touch the 

bottom of the tank once you have removed  
the protective cap.

Insert the black ink tank into the slot on  
the right. Press down until the ink tank  
locks into place.

Repeat the procedure for the color ink  
tank (BCI-24 Color), inserting it into the  
remaining slot.

Close the front cover. Pull out the paper 
rest and the output tray.

Turn the print head over, then remove  
the orange protective cap. 

Electrical contacts

Print head nozzles

Remove the print head from its package.

NOTE: Do not touch the electrical contacts.

Raise the gray lock lever.

Slide the print head into the holder until  
it is securely seated.

Lower the gray lock lever until it locks  
into place.

Serial number

Print head

holder

Packing

material

Shipping Tape

Open the front cover. Remove the packing 
material from the print head holder.

Remove the shipping tape from the printer. 

NOTE: The serial number is located to the right 
of the print head. You will need this to register  
the product.

NOTE: The “i320 Setup Software & User’s  
Guide” CD-ROM contains printer drivers,  
software applications and electronic manuals.

Carefully remove all items from the box.

          Series

Bubble Jet Printer

Documentation 

and Software Kit

Power Cord

        Print Head

Ink Tanks

BCI-24 Black                      BCI-24 Color

1

1

2

1

5

4

3

1

2

1

2

3

4

2