Canon i960 安装指导

Pinch the paper guide and slide it to the left.  
Load a sheet of blank paper in the paper  
rest. Slide the guide toward the left edge  
of the paper.

3

Paper
Guide

Top Port:

USB 2.0  

Hi-Speed

USB Cable

Bottom Port:

USB 1.1

NOTE: The printer will perform a print  
head cleaning after the cover is closed.

Paper Rest

Paper Output Tray

click

Insert the ink tank into the correct slot.  
(Refer to the color guide on the print head holder.)

Press down until the ink tank clicks into place.

Electrical Contacts

Print Head Nozzles

click

TURN THE PRINTER OFF.

Connect one end of the USB cable  
to the computer, the other to the  
appropriate USB port on the printer.

If your computer and operating system  
support USB 2.0 Hi-Speed, use the  
top port. Otherwise, use the bottom port.

IMPORTANT: Be sure the printer is  
off before continuing, or the computer  
will attempt to install the printer  
driver before the printer is ready.

NOTE: The 

960 Series Photo Printer 

is equipped with both USB 2.0 Hi-Speed  
and USB 1.1 ports. If you do not know  
your USB version number, connect using  
the lower port.

Do not switch port after installation.

Slide the print head into the holder.  
The print head will rest at a slight angle.

Remove the print head from its package.

Remove the orange protective cap 
from the print head nozzles. 

NOTE: Do not touch the electrical contacts
or the print head nozzles.

Lower the lock lever and press it down  
until it clicks into place.

Raise the lock lever on the printer.

Tear at notch to open

Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet.

Open the front cover. The print head holder
automatically moves to the center. Remove  
the protective tape.

Write down the serial number located to 
the right of the print head holder. You will  
need this later to register the product.

Shipping Tape

POWER

Lamp

POWER

Button

Serial Number

 Protective  

Tape

Press the POWER button. The printer  
will initialize.

Remove the shipping tape from the  
front and back of the printer. 

i 960 Series

Photo Printer

Carefully remove all items from the box.

Documentation  

and Software Kit

Photo Paper Tray

Peel back the orange tab and completely  
remove the plastic wrapper from the  
Magenta Ink Tank (BCI-6M). 

Twist off and discard the orange  
protective cap.

NOTE: To avoid spilling ink, never  
press on the sides of an ink tank.

Insert the remaining ink tanks into 
their assigned slots.

Close the front cover and extend the  
paper rest and paper output tray.

Protective Cap

Ink Tanks

      BCI-6Y Yellow               BCI-6M Magenta

BCI-6BK Black                                                          BCI-6C Cyan

      BCI-6PM Photo Magenta               BCI-6PC Photo Cyan

Power Cord

i 960 Series Print Head

1

2

3

4

5

1

5

4

3

1

2

1

2

3

4

5

1

2