LXE hx3 参考指南

84 

Settings | Control Panel Options 

HX3 Reference Guide  

E-EQ-HX3RG-C 

Discover and manage pairing with nearby Bluetooth devices.  Only LXE printers or scanners are 
recognized and displayed in the Bluetooth panel.  All other Bluetooth devices are ignored. Your 
Bluetooth panel setups may be different than those shown on the following pages. 

Factory Default Settings 

Discovered Devices 

None 

Settings 
Report when connection lost 

Disabled 

Report when connected 

Disabled 

Report failure to reconnect 

Disabled 

Computer is connectable 

Enabled 

Computer is discoverable 

Disabled 

Prompt if devices request to pair 

Disabled 

Continuous search 

Enabled 

Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are 
discovered, pair, connect and disconnect. There may be audible or visual signals as paired devices 
re-connect with the HX3.  

•  The HX3 default Bluetooth setting is On.  
•  The HX3 cannot be discovered by other Bluetooth devices when the Computer is 

discoverable option is disabled (unchecked) on the Settings panel.  

•  Other Bluetooth devices cannot be discovered if they have been set up to be Non-

Discoverable or Invisible. 

•  The HX3 can pair with one Bluetooth scanner and one Bluetooth printer.  
•  It is not necessary to disconnect a paired scanner and printer before a different 

scanner or printer is paired with the HX3. 

•  The Bluetooth remote device should be as close as possible, and in direct line of 

sight, with the HX3 during the pairing process.  

Assumption: 

The System Administrator has Discovered and Paired targeted Bluetooth 

devices for the HX3.