LXE hx3 参考指南
Settings | Control Panel Options
95
E-EQ-HX3RG-C
HX3 Reference Guide
HX3 Options
Access:
| Settings | Control Panel | HX3 Options
Note:
If there is no icon corresponding to this item in the Control Panel, contact your LXE
representative for upgrade details.
representative for upgrade details.
Set options such as IP V6 and autolaunching time sync.
It may be necessary to warmboot the HX3 after making desired changes. A pop up window
indicates if a warmboot is required.
indicates if a warmboot is required.
Factory Default Settings
Communication
IP Version 6 Addressing
IP Version 6 Addressing
Disabled
Allow Remote Desktop Autologon
Dimmed
Autolaunch TimeSync
Disabled
Misc
CapsLock Dimmed
NumLock Dimmed
Touch screen disable
CapsLock Dimmed
NumLock Dimmed
Touch screen disable
Dimmed
Enable Triple Tap Keypad
Dimmed
Figure 0-25 HX3 Options Properties
Enable (check) or disable (uncheck) desired options. Tap OK to save the settings or tap the “X”
button to ignore changes. Tap the “?” box for Help.
button to ignore changes. Tap the “?” box for Help.
The changes take effect immediately or where noted after a warmboot.
Communication
Options on this tab configure communication options. Options not available on the HX3 are
dimmed.
dimmed.
IP Version 6
Addressing
Addressing
By default, IPv6 is disabled. Enable this checkbox (checked) to enable IPv6.