LXE hx3 参考指南

104 

Settings | Control Panel Options 

HX3 Reference Guide  

E-EQ-HX3RG-C 

Set network driver properties and network access properties. Select a connection to use, or create 
a new connection on the HX3.  

 

Tap OK to save the settings or tap the X button to ignore changes. Tap the ? button for Help. 

1.  On the mobile device, select 

Connections. A window is displayed showing the existing connections. 

2.  Assuming the one you want does not exist, double-tap Make New Connection.  

3.  Give the new connection an appropriate name (My Connection @ 9600, etc.). Tap the Direct 

Connection radio button. Tap the Next button.  

4.  From the popup menu, choose the port you want to connect to. Only the available ports are 

shown. 

5.  Tap the Configure... button. 

6.  Under the Port Settings tab, choose the appropriate baud rate. Data bits, parity, and stop bits 

remain at 8, none, and 1, respectively. 

7.  Under the Call Options tab, be sure to turn off Wait for dial tone, since a direct connection 

will not have a dial tone. Set the timeout parameter (default is 5 seconds). Tap OK. 

8.  TCP/IP Settings should not need to change from defaults. Tap the Finish button to create the 

new connection.  

9.  Close the Remote Networking window. 

10.  To activate the new connection select 

 | Settings | Control Panel | PC Connection and tap 

the Change Connection… button. 

11.  Select the new connection. Tap OK twice. 

12.  Close the Control Panel window. 

13.  Connect the desktop PC to the mobile device with the appropriate cable. 

14.  Click the desktop Connect icon to test the new connection.