LXE hx3 参考指南
SD Flash Cards, CAB Files and Programs
117
E-EQ-HX3RG-C
HX3 Reference Guide
SD Flash Cards, CAB Files and Programs
The Flash card, located inside the HX3, is intended to protect the user from losing the LXE
drivers and configuration information in the event of a cold boot. Also, on any boot, the contents
of any registered CAB files are automatically unpacked. The flash card cannot be
removed/exchanged by the user.
drivers and configuration information in the event of a cold boot. Also, on any boot, the contents
of any registered CAB files are automatically unpacked. The flash card cannot be
removed/exchanged by the user.
Access Files on the Flash Card
Tap the My Device icon on the Desktop then tap the System icon.
Files
A flash card is used for permanent storage of the LXE driver and utility files. It is also used for
registry content back up. The flash card cannot be removed/exchanged by the user.
registry content back up. The flash card cannot be removed/exchanged by the user.
CAB files, when executed, are not deleted.
SUMMIT.CAB
Summit Client files needed for radio operation.
The following CAB files are optional and may or may not be present:
LXE_HX3_ENABLER.CAB Wavelink Avalanche Enabler.
BLUETOOTH.CAB
Bluetooth Client files needed for pairing operation.
Note:
The Wavelink Avalanche Enabler CAB file should not be executed if the HX3 will not be
managed using Wavelink Avalanche Manager. See section titled Wavelink Avalanche
Enabler Configuration later in this chapter.
managed using Wavelink Avalanche Manager. See section titled Wavelink Avalanche
Enabler Configuration later in this chapter.