LXE hx3 参考指南

下载
页码 246
 
E-EQ-HX3RG-C 
HX3 Reference Guide 
 
Chapter 4  Scanner 
Introduction 
 
All configuration items in this chapter assume that an ActiveSync connection has 
been made with a PC and the PC is running LXEConnect.  All configuration input is 
made via the HX3’s desktop displayed on the connected PC.  Please see Chapter 3, 
System Configuration for details. 
Note: 
For the purposes of this chapter, the term “scanner” represents the ring scanner, ring 
imager, mobile Bluetooth scanner and/or 2D imager, unless specifically stated 
otherwise.  
Access: 
 | Settings | Control Panel | Scanner  
Set HX3 scanner keyboard wedge, scanner sound, and scanner port. Assign baud rate, parity, stop 
bits and data bits for COM1. Scanner parameters apply to the tethered ring scanner/imager or the 
mobile Bluetooth barcode reader only.  
Barcode manipulation parameters in this chapter are applied to the data resulting from 
successful barcode scans sent to the HX3 for processing. 
Tethered scanner configuration can be changed using the Scanner Control Panel or via the LXE 
API functions. While the changed configuration is being read, the ring scanner’s Scan LED is 
solid amber. The ring scanner is not operational during the configuration update. 
After hotswapping the tethered scanners the HX3 auto-detects the tethered scanner type. 
The HX3 may be using any of the following ring scanners: 
• 
Symbol SE4400 Imager 
• 
Symbol SE955 Scanner 
or one of two mobile Bluetooth scanners: 
• 
PSC 7700BT 
• 
PL4407