LXE hx3 参考指南
162
Summit Client Configuration
HX3 Reference Guide
E-EQ-HX3RG-C
Summit Client Configuration
Note:
Terminology used on your screen displays may be different than those shown in the
figures in this chapter. Contact your LXE representative for Summit driver updates as
they become available.
figures in this chapter. Contact your LXE representative for Summit driver updates as
they become available.
The Summit radio is either an 802.11g radio, capable of both 802.11b and 802.11g data rates or an
802.11a radio, capable of 802.11a, 802.11b and 802.11g data rates.
802.11a radio, capable of 802.11a, 802.11b and 802.11g data rates.
Start the Summit Client configuration by tapping the Summit Client Utility icon on the desktop.
You can also start the Summit Client utility by tapping Start | Programs | Summit | SCU.
Important: After adding a new profile or changing parameters of an existing profile, tap Start |
Suspend. When the device Resumes, saved changes are applied.
You can also start the Summit Client utility by tapping Start | Programs | Summit | SCU.
Important: After adding a new profile or changing parameters of an existing profile, tap Start |
Suspend. When the device Resumes, saved changes are applied.
When using the 802.11a radio, the U-NII 1 band is the preferred band for indoor operation. For
regulatory domains in which the U-NII 3 band is allowed, the following channels are supported:
149, 157 and 161. The AP must be configured accordingly.
regulatory domains in which the U-NII 3 band is allowed, the following channels are supported:
149, 157 and 161. The AP must be configured accordingly.
Note: Placing the HX3 in suspend terminates the ActiveSync connection. The ActiveSync
connection must be re-established after the HX3 exits suspend.
Summit Client Utility
Access:
Start | Programs | Summit | SCU or SCU Icon on Desktop or
SCU Icon in Taskbar or WiFi Icon in the Windows Control Panel
SCU Icon in Taskbar or WiFi Icon in the Windows Control Panel
Figure 5-1 Summit Client Utility (SCU)
The Main tab provides information, the Admin Login and active config (profile) selection.
Profile specific parameters are found on the Config or Profile tab. The parameters on this tab can
be set to unique values for each profile.
be set to unique values for each profile.
The Status tab contains information on the current connection.
The Diags tab provides utilities to troubleshoot the client (network device).
Global parameters are found on the Global Settings or Global tab. The values for these
parameters apply to all profiles.
parameters apply to all profiles.
Note:
A password is required before making changes to Summit client profile parameters. A
password is not required to switch from one profile to another.
password is not required to switch from one profile to another.