LXE hx3 参考指南
168
Summit Client Configuration
HX3 Reference Guide
E-EQ-HX3RG-C
Config / Profile Parameters
Parameter Default
Explanation
Config or
Edit Profile
Edit Profile
Default
A string of 1 to 32 alphanumeric characters, establishes the
name of the Config or Profile.
name of the Config or Profile.
Options are Default or ThirdPartyConfig.
SSID
Blank
A string of up to 32 alphanumeric characters. Establishes the
Service Set Identifier (SSID) of the WLAN to which the client
connects.
Service Set Identifier (SSID) of the WLAN to which the client
connects.
Client Name
Blank
A string of up to 16 characters. The client name is assigned to
the network card and the device using the network card. The
client name may be passed to networking wireless devices, e.g.
Access Points.
the network card and the device using the network card. The
client name may be passed to networking wireless devices, e.g.
Access Points.
Power Save
Fast
Power save mode is On.
Options are: Constantly Awake Mode (CAM) power save off,
Maximum (power saving mode) and Fast (power saving
mode).
Maximum (power saving mode) and Fast (power saving
mode).
Tx Power
Maximum
Maximum setting regulates Tx power to the Max power setting
for the current regulatory domain.
for the current regulatory domain.
Options are: Maximum, 50mW, 30mW, 20 mW, 10mW, 5mW
or 1mW. Depending on the version of the SCU, the options for
Tx Power are between Maximum and 1mW.
or 1mW. Depending on the version of the SCU, the options for
Tx Power are between Maximum and 1mW.
Bit Rate
Auto
Setting the rate to Auto will allow the Access Point to
automatically negotiate the bit rate with the client device.
automatically negotiate the bit rate with the client device.
Options are: Auto, 1 Mbit, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or
54 Mbit.
54 Mbit.