LXE hx3 参考指南
Overview
3
E-EQ-HX3RG-C
HX3 Reference Guide
Important Battery Information
Backup Battery -- If the HX3 has been without a power source (connected to a fully charged
tethered battery or docked in a powered cradle) for an extended period of time or if HX3 external
power sources become completely discharged or dead, a fully charged HX3 backup battery will
last for up to 15 minutes. If the backup battery is fully discharged, the HX3 will reset as soon as it
is docked in a powered cradle or connected to a fully charged tethered battery. A reset will cause
loss of data and custom programs in RAM. Always store unused HX3s with a fully charged
tethered battery. If possible, ensure the HX3 is periodically docked in a powered cradle to
maintain an optimum backup battery charged status.
tethered battery or docked in a powered cradle) for an extended period of time or if HX3 external
power sources become completely discharged or dead, a fully charged HX3 backup battery will
last for up to 15 minutes. If the backup battery is fully discharged, the HX3 will reset as soon as it
is docked in a powered cradle or connected to a fully charged tethered battery. A reset will cause
loss of data and custom programs in RAM. Always store unused HX3s with a fully charged
tethered battery. If possible, ensure the HX3 is periodically docked in a powered cradle to
maintain an optimum backup battery charged status.
The Status LED provides battery information.
When the LED is…
The battery status is…
Green – Solid
HX3 is booting.
Green – Blinking
The HX3 is On. The OS has loaded and the main battery has a
good charge (or the device is attached to an AC power source).
good charge (or the device is attached to an AC power source).
Red – Steady
Main Battery Low. If the main battery is not replaced with a fully
charged battery before the main battery fails, the HX3 is turned
Off.
charged battery before the main battery fails, the HX3 is turned
Off.
Red – Blinking
Main Battery Power Fail. The Backup battery maintains system
settings until depleted.
settings until depleted.
Off
Suspend or Off. Unit is in suspend mode or both Main and
Backup batteries are depleted.
Backup batteries are depleted.
• The HX3 uses the same batteries, charger and cradle as the LXE HX2 computer.
• Until the tethered battery and backup battery are completely depleted, the HX3 is
• Until the tethered battery and backup battery are completely depleted, the HX3 is
always drawing power from the batteries (On).
• New Standard / Extended batteries must be fully charged prior to use.
• Whenever possible, place the HX3 in a powered cradle to conserve tethered battery
• Whenever possible, place the HX3 in a powered cradle to conserve tethered battery
power and recharge the backup battery.
• When a new battery is tethered to the HX3 for the first time (or after the backup
battery is depleted), the Time and Date reverts to factory default values.
• Backup battery replacement is performed by LXE.
The HX2 cradle can charge two standard batteries in less than four hours or two extended
batteries in less than 8 hours in the battery wells behind the HX2 docking bay. The cradle requires
an external power source before battery charging can occur.
batteries in less than 8 hours in the battery wells behind the HX2 docking bay. The cradle requires
an external power source before battery charging can occur.
The HX2 Multi-Charger can charge up to six batteries at the same time. Each charging bay can
accept either type of battery. The Multi-Charger requires an external power source before
charging/analyzing can occur.
accept either type of battery. The Multi-Charger requires an external power source before
charging/analyzing can occur.
When the HX3 is connected to a PC running ActiveSync and LXEConnect, additional battery
information can be viewed by clicking
information can be viewed by clicking
| Settings | Control Panel | Battery tab. See Chapter
3, System Configuration for details.
Li-Ion Battery
When disposing of the tethered batteries, the following precautions should be observed: The
battery should be disposed of properly. The battery should not be disassembled or crushed. The
battery should not be heated above 212°F (100°C) or incinerated.
battery should be disposed of properly. The battery should not be disassembled or crushed. The
battery should not be heated above 212°F (100°C) or incinerated.