LXE hx3 参考指南
Hardware Configuration
47
E-EQ-HX3RG-C
HX3 Reference Guide
Input/Output Connectors
The HX3 has three I/O connectors. Two connectors are located next to each other on the back of
the mobile device. Each of the two connectors (one for left-handed users and the other for right-
handed users) interfaces with peripherals such as a Laser Ring Scanner, an Imager Ring Scanner,
an audio headset and a tethered battery.
the mobile device. Each of the two connectors (one for left-handed users and the other for right-
handed users) interfaces with peripherals such as a Laser Ring Scanner, an Imager Ring Scanner,
an audio headset and a tethered battery.
Connector 1
Located on the back of HX3 and can accommodate a:
•
Tethered Laser or Imager Scanner
•
Tethered Headset/Microphone and Battery
•
Tethered Battery
Connector 2
Located on the back of HX3 and can accommodate a:
•
Tethered Laser or Imager Scanner
•
Tethered Headset/Microphone and Battery
•
Tethered Battery
Connector 3
Located on the bottom of HX3 and can accommodate:
•
Cradle
•
Cradle Power Input
•
USB Keyboard and mouse through cradle
Figure 2-2 COM Ports
The third I/O connector is used when docking the HX3 in a cradle. The cradle has RS-232, USB
Client, unpowered USB Host and Power connections. The power connection on the cradle
supplies power to the battery charging bays. All communication is managed by the cradle.
Client, unpowered USB Host and Power connections. The power connection on the cradle
supplies power to the battery charging bays. All communication is managed by the cradle.