LXE hx3 参考指南

HX2 Docking/Charging Cradle 

57 

E-EQ-HX3RG-C 

HX3 Reference Guide 

 

The desktop cradle secures the HX3, recharges the tethered battery and a spare battery (Standard 
and Extended), has a protected storage bay for the tethered Ring Scanner when the HX3 is 
docked, and enables serial communication with USB devices (host, client, and other USB cabled 
devices).  

Using an external power supply the cradle recharges Standard batteries in approximately 4 hours 
(8 hours for the Extended battery). The HX3 does not need to be docked during a spare battery 
charging process.  See Accessories. 

Remove the voice case before placing the HX3 in the cradle. The HX3 cannot be docked in a 
cradle while it is mounted in a hip flip. 

The cradle LEDs are on the front of the cradle. 

B1 LED – Back left battery 
charging bay  

Normal State – Off. With battery and AC power, normal 
state may be any state listed in Cradle LEDs. 

PWR LED - HX3 docked / on 
/ receiving power bay 

Normal State – Off. With HX3 in, turned On and AC 
power, normal state is On. 

B2 LED – Back right battery 
charging bay 

Normal State – Off. With battery and AC power, normal 
state may be any state listed in Cradle LEDs. 

 

•  Do not put the HX3 into Suspend Mode (using Start | Suspend or by tapping the 

Power key) while the HX3 is connected to peripheral devices (or ActiveSync) 
through the connectors on the cradle. The HX3 is unable to maintain the connection 
during Suspend Mode.  

•  If the USB connections are interrupted due to a Suspend operation – then when the 

HX3 resumes, disconnect the cables and then reconnect the cables again to initiate 
USB and/or ActiveSync connection again.