LXE hx3 参考指南
76
Start Menu Program Options
HX3 Reference Guide
E-EQ-HX3RG-C
Start Menu Program Options
The following options represent the factory default program installation. Your system may be
different based on the software and hardware options purchased.
different based on the software and hardware options purchased.
Access:
| Programs
Communication
Stores Network communication options
Start FTP Server
Begin connection to FTP server
Stop FTP Server
Stop connection with FTP server
Command Prompt
The command line interface in a separate window
Radio Config Utility
Radio management program. WZC icon in toolbar.
Summit Client
RF client management program.
Wavelink Avalanche
Option. Remote management for networked
devices.
devices.
• The wireless client connects automatically during each reboot.
• Bluetooth re-connects to paired devices automatically at the conclusion of each
• Bluetooth re-connects to paired devices automatically at the conclusion of each
reboot.
• If installed and pre-configured, Wavelink Avalanche connects remotely and
downloads updates automatically during each reboot.
Communication
Access:
| Programs | Communication
Note:
Some communication menu options require an external modem connection to the HX3.
Modems are not available from LXE nor supported by LXE.
Modems are not available from LXE nor supported by LXE.
Start / Stop FTP Server
Access:
| Programs | Communication |
Start FTP Server or
Stop FTP Server
Stop FTP Server
These shortcuts call the Services Manager to start and stop the FTP server. The server defaults to
Off (for security) unless it is explicitly turned on from the menu.
Off (for security) unless it is explicitly turned on from the menu.