Canon LBP-1000 用户指南
61
3
The Standard Printing Environment Settings
SYMSET (symbol set) allows you to select the symbol set, a collection of letters,
numbers, punctuation marks and special symbols.
numbers, punctuation marks and special symbols.
Appendix 2 (see page 162) of this guide shows the names of internal symbol sets you
can select.
can select.
If the currently selected font does not support the orientation or symbol set you’ve
selected, the control panel font selection returns to the factory default setting.
AUTO CR appends a CR (carriage return) to each line feed for the print job. Some
environments, such as UNIX, indicate a new line using only the line feed control code.
environments, such as UNIX, indicate a new line using only the line feed control code.
This option automatically appends the required CR to each line feed.
OFF
The printer does not append a CR to each line feed.
ON
The printer appends a CR to each line feed automatically.
WIDE A4 changes the number of characters that can be printed on a single line of A4
paper. This feature only applys to A4 paper. When this feature is set to ON, the right
and left margins narrow to about 3 mm (
and left margins narrow to about 3 mm (
1
/
8
in.).
OFF
Up to seventy-eight 10-pitch characters can be printed on one line.
ON
Up to eighty 10-pitch characters can be printed on one line.
A4/LTR OVERRIDE changes LTR (Letter) size requests from the printer driver to A4
size or vice versa. Either A4 or Letter-size paper should be loaded in the printer.
OFF
The printer does not override paper size A4 with letter or vice
versa.
versa.
ON
The printer overrides paper size A4 with letter or vice versa.
PCL MENU
AUTO CR=OFF
AUTO CR=OFF
*
PCL MENU
WIDE A4=OFF
WIDE A4=OFF
*
A4/LTR OVERRIDE=
OFF
OFF
*
PCL MENU
SYMSET=ROMAN-8 *
SYMSET=ROMAN-8 *