Canon LBP-1120 用户指南
Paper Requirements
2-6
P
aper Input and Output
2
Paper You Cannot Use
To avoid problems such as paper jams and printer malfunctions, the following types
of paper should never be used.
of paper should never be used.
IMPORTANT
•
The following paper tends to cause paper jams. Paper that is:
- too thick or too thin.
- irregular shaped.
- wet or holding moisture.
- torn or damaged.
- rough, extremely smooth, or glossy.
- wrinkled.
- folded at corners.
- curled or creased.
- Paper that has holes for binding or perforations.
- Paper that has special coating on its surface (coated paper for ink jet printers, etc.).
- Adhesive labels with the base easily peeled.
- Paper that has been used once by the printer, copy machine or other laser printers.
- too thick or too thin.
- irregular shaped.
- wet or holding moisture.
- torn or damaged.
- rough, extremely smooth, or glossy.
- wrinkled.
- folded at corners.
- curled or creased.
- Paper that has holes for binding or perforations.
- Paper that has special coating on its surface (coated paper for ink jet printers, etc.).
- Adhesive labels with the base easily peeled.
- Paper that has been used once by the printer, copy machine or other laser printers.
(The back side of this paper is also unusable. However, note that you can use the
manual feed slot to perform manual duplex printing on the reverse side of a sheet of
paper that has already been printed on using this printer. You cannot print on the same
side of a sheet of paper that has already been printed on.)
manual feed slot to perform manual duplex printing on the reverse side of a sheet of
paper that has already been printed on using this printer. You cannot print on the same
side of a sheet of paper that has already been printed on.)
•
Paper that changes its quality at high temperature.
•
Paper that uses ink that melts, burns, evaporates or emits harmful gases with the
temperature (about 190°C or 374°F) of the fixing unit.
- Heat-sensitive paper.
- Paper used for color printing with a processed surface.
- Paper with adhesive on its surface.
temperature (about 190°C or 374°F) of the fixing unit.
- Heat-sensitive paper.
- Paper used for color printing with a processed surface.
- Paper with adhesive on its surface.
•
Paper that causes failure or damage to the printer.
- Carbon paper.
- Paper with staples, clips, ribbons or tapes.
- Carbon paper.
- Paper with staples, clips, ribbons or tapes.
•
Paper that is difficult for the toner to adhere to.
- Paper with rough surfaces.
- Paper containing thick fibers.
- Paper with rough surfaces.
- Paper containing thick fibers.