Canon ip4500 安装指导

Please confirm the included items against the illustration printed on the lid of the packing box.

A USB cable is necessary to connect the printer with your computer.

•

•

When cleaning the exterior of the printer, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Printer” in the Quick Start Guide.

You can load paper in both the Rear Tray and 

Cassette.

At purchase, the printer is set to feed from the 

Rear Tray.

a

Pull out the cassette from the 

bottom of the printer.

Cassette

Cover

b

Remove the cover of the cassette.

c

For A5 or larger sized paper, pull 

the tab towards you to unlock and 

extend the cassette.

Tab

A5 or larger

(nonstandard-size paper: 8 inches / 203 mm 

or more in length)

5" x 7" or smaller

(nonstandard-size paper: less than 8 inches / 

203 mm in length)

d

Load the paper into the cassette 

with the print side facing 

DOWN.

Loading paper in the cassette provides 

additional paper handling flexibility. For 

additional information, refer to the User’s Guide.

a

 Place the printer on a flat and 

horizontal surface, and do not place 

any objects in front of the printer. 

Open the Rear Tray and extend the Paper 

Support Extension. Press the Open button to 

open the Paper Output Tray, and extend the 

Paper Output Tray Extension. 

b

Plug the power cord in the back of the 

printer and connect the other end to the 

wall outlet.

c

Press the POWER button to turn on the 

printer.

1

d

Open the Top Cover. The Print Head 

Holder moves to the center.

Top Cover

e

Open the Inner Cover. 

Inner Cover

3

4

2

a

Remove the Print Head from its 

package.

b

Remove the orange protective cap from 

the Print Head and discard it.

Print Head Nozzles

Electrical Contacts

Protective Cap

Do not touch the print head nozzles and the electrical 

contacts.

c

Firmly raise the Print Head Lock Lever 

until it stops. The Print Head Lock 

Lever may feel heavy.

d

Insert the Print Head.

Do not touch!

e

Push the Print Head to hold it in place, 

and lower the Print Head Lock Lever 

carefully.

For the ink tanks compatible with this printer, refer to 

the back cover of the Quick Start Guide.

a

Pull the orange tape in the direction of 

the arrow to peel off the protective film 

and remove the film completely.

If the air hole is blocked with the remaining film, 

ink may leak out or may not eject properly.

b

Twist off and discard the orange 

protective cap located on the bottom of 

the ink tank.

Electrical Contacts

Ink Port

Protective Cap

Do not press!

c

Insert the ink tank into the right-hand 

slot and press the   mark on the ink 

tank until it clicks into place.

d

Make sure the ink lamp lights red.

Install all ink tanks 

in order from right to 

left according to the 

colored label.

e

Close the Inner Cover and the Top 

Cover.

If the 

ALARM lamp on the printer flashes orange after 

you have closed the Top Cover, refer to “ALARM Lamp 

Flashes Orange” in “Troubleshooting” of the Quick 

Start Guide. 

a

Pinch the Paper Guide and slide it 

to the left end. Load two sheets of 

supplied paper (MP-101) loaded with 

the printing side (whiter side) facing UP 

in the Rear Tray, align the paper with 

the right side of the Cover Guide, then 

slide the Paper Guide against the paper 

stack. 

Paper Guide

Print Side

Cover Guide