Ricoh 2035e 用户手册

Turning On the Power

25

-When the fax unit (optional) is 

When the main power switch is
turned off while using the fax func-
tion, waiting fax and print jobs may
be canceled, and incoming fax docu-
ments not received. If you have to
turn off this switch for some reason,
keep the following points in mind:

r Make sure 100% is shown as avail-

able memory on the display before
turning off the main power switch
or unplugging the power cord. Fax
files in memory are deleted an
hour after you turn off the main
power switch or unplug the power
cord. See ”Power Failure Report”,
Facsimile Reference <Advanced Fea-
tures>.

r The On indicator does not go out,

but blinks in dial-in mode even if
you press the operation switch.
When this happens, check the ex-
planations below, and turn off the
main power switch.
• the  computer  is not controlling

the machine.

• the machine is not receiving a

fax.

-Energy Saver Mode

If you do not use the machine for a
certain period after an operation, or
when you press the {Energy Saver}
key, the display disappears and the
machine goes into Energy Saver
mode. When you press the {Energy
Saver}

 key again, the machine returns

to the ready condition. The machine
uses less electricity in Energy Saver
mode.

r You can change the amount of time

the machine waits before switch-
ing to Energy Saver mode after
copying has finished or the last op-
eration is performed. See p.58
“Panel Off Timer”.

-Auto Off

The machine automatically turns it-
self off when the job is finished, after
a certain period of time has elapsed.
This function is called "Auto Off".

r You can change the Auto Off time.

See p.58 “Auto Off Timer”.

r The Auto Off Timer function will

not operate in the following cases:
• When a warning message ap-

pears

• When the service call message

appears

• When paper is jammed
• When the cover is open