Ricoh 2035e 用户手册
Initial Scanner Setup
17
2
Note
r If either
[
SADF
]
or
[
Batch
]
is
specified when scanning, this
setting is invalid.
setting is invalid.
r If
[
Off
]
is selected, sending will
start automatically after one
page of original is scanned.
page of original is scanned.
r If
[
Set Wait Time
]
is selected, en-
ter the waiting time in seconds
(3-999) for placing additional
originals with the number keys.
Scanning will start when addi-
tional originals are placed and
the {Start} key is pressed within
this time. You can end scanning
and begin sending by pressing
the {#} key within this time. If
the specified time has passed,
sending starts automatically
and you do not need to press the
(3-999) for placing additional
originals with the number keys.
Scanning will start when addi-
tional originals are placed and
the {Start} key is pressed within
this time. You can end scanning
and begin sending by pressing
the {#} key within this time. If
the specified time has passed,
sending starts automatically
and you do not need to press the
{#} key.
r If
[
Continuous Wait
]
is selected,
the machine will wait for addi-
tional originals until the {#} key
is pressed. Scanning will start
when additional originals are
placed and the {Start} key is
pressed. You can end scanning
and begin sending by pressing
the {#} key.
tional originals until the {#} key
is pressed. Scanning will start
when additional originals are
placed and the {Start} key is
pressed. You can end scanning
and begin sending by pressing
the {#} key.
r If originals are placed in the
ADF, sending will start without
waiting for additional originals
after all originals in the ADF
have been scanned even if you
select
waiting for additional originals
after all originals in the ADF
have been scanned even if you
select
[
Continuous Wait
]
.
r If a paper jam occurs or any of
the following operation is per-
formed while the machine is
waiting for additional originals,
the countdown stops and does
not start again until the {#} key
is pressed.
• Changing the settings such
formed while the machine is
waiting for additional originals,
the countdown stops and does
not start again until the {#} key
is pressed.
• Changing the settings such
as the scan settings
• Opening the upper cover of
the ADF
• Pressing the {Interrupt} key to
activate the copy mode
v Wait Time for Next Original(s): SADF
When dividing originals and scan-
ning them separately with the
ADF to form a single file, select
ning them separately with the
ADF to form a single file, select
[
Set
Wait Time
]
or
[
Continuous Wait
]
for
the waiting status.
Note
r If
[
SADF
]
is specified when scan-
ning, this setting is valid.
r If
[
Set Wait Time
]
is selected, en-
ter the waiting time in seconds
(3-999) for placing additional
originals with the number keys.
Scanning will start automatical-
ly when additional originals are
placed within this time. You can
end scanning and begin sending
by pressing the {#} key within
this time. If the specified time
has passed, sending starts auto-
matically and you do not need
to press the {#} key.
(3-999) for placing additional
originals with the number keys.
Scanning will start automatical-
ly when additional originals are
placed within this time. You can
end scanning and begin sending
by pressing the {#} key within
this time. If the specified time
has passed, sending starts auto-
matically and you do not need
to press the {#} key.
r If
[
Continuous Wait
]
is selected,
the machine will wait for the ad-
ditional originals until the {#}
key is pressed. Scanning will
start when additional originals
are placed and the {Start} key is
pressed. You can end scanning
and begin sending by pressing
the {#} key.
ditional originals until the {#}
key is pressed. Scanning will
start when additional originals
are placed and the {Start} key is
pressed. You can end scanning
and begin sending by pressing
the {#} key.
r Even if originals are placed on
the exposure glass, the machine
will function as the settings.
However, every time originals
are placed, you must press the
will function as the settings.
However, every time originals
are placed, you must press the
{Start} key to start scanning.