Ricoh 1027 补充手册
Using PostScript 3
70
3
❖ Document Server
Use this function to store hard disk documents that you want to print as well
as documents you might want to later combine or process for printing.
as documents you might want to later combine or process for printing.
Note
❒ The “File Name” can contain to 16 alphanumeric (a-z, A-Z, 0-9) characters.
Reference
For details about the Document Server function, see "Accessing the Docu-
ment Server", Printer Reference.
ment Server", Printer Reference.
How to Use Sample Print
Follow the procedure below to print a document using the Sample Print function.
Windows 95 / 98 / Me
A
In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
The [Print] dialog box appears.
B
Select the printer, and then click [Properties].
C
Click the [Setup] tab.
D
In the [Job Type:] list, click [Sample Print].
E
Click [Details...].
F
In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-
Z, 0-9) characters.
The user ID associates the user with his / her jobs.
Z, 0-9) characters.
The user ID associates the user with his / her jobs.
G
Click [OK].
H
Click [OK] to close the printer properties dialog box.
I
Set the number of copies to two or more, and then start the printing from
the application's [Print] dialog box.
The sample print job is sent to the machine and one set is printed.
the application's [Print] dialog box.
The sample print job is sent to the machine and one set is printed.
J
Check the printed output to make sure the settings are correct.
If the settings are correct, perform the following steps.
If you want to delete a saved job, see p.74 “Deleting a Sample Print File”.
If the settings are correct, perform the following steps.
If you want to delete a saved job, see p.74 “Deleting a Sample Print File”.
K
On the machine's control panel, press the {Printer} key to display the printer screen.
L
Press [Print Jobs].