Ricoh 240w 用户指南
DRAFT 2003/11/12
User Tools (Copier Features)
90
4
❖
❖
❖
❖ User Auto R/E
Specifies original and copy sizes displayed when [UserAuto] is pressed. See
p.41 “User Auto Reduce/Enlarge”.
Select the copy size to use with the original size.
p.41 “User Auto Reduce/Enlarge”.
Select the copy size to use with the original size.
Note
❒ If you select a setting for A0(E), A4(A), or B1 size paper in User Auto Re-
duce/Enlarge, you cannot select [Horizontal
L
L
L
L]. When you cannot select
[Horizontal
L
L
L
L] (grayed out), select the original size and copy size for Hori-
zontal using this setting.
❖
❖
❖
❖ UserAutoR/E Orig.
Specifies whether an original should be processed as a vertical or horizontal
original when [UserAuto] is selected. See p.41 “User Auto Reduce/Enlarge”.
• Vertical
original when [UserAuto] is selected. See p.41 “User Auto Reduce/Enlarge”.
• Vertical
K
• Horizontal
L
Note
❒ Default: VerticalK
Note
❒ You cannot specify A0(E), A4(A), B1, or B4 in User Auto R/E when you se-
lect [Horizontal
L
L
L
L].
Edit
❖
❖
❖
❖ Margin Adjustment
Specifies the default setting for the margin size.
You can set the top and bottom margin sizes. See p.43 “Margin Adjustment”.
You can set the top and bottom margin sizes. See p.43 “Margin Adjustment”.
Note
❒ Default:
• Metric version: +20 mm
• Inch version: +0.8"
• Inch version: +0.8"
❒ The size can be set as follows:
• Metric version: -200 mm to 200 mm (1 mm increments)
• Inch version: -7.8" to 7.8" (0.1" increments)
• Inch version: -7.8" to 7.8" (0.1" increments)
❖
❖
❖
❖ Shift Image
Specifies the default setting for Shift. Use [
↑↑↑↑] [↓↓↓↓] to set the shift orientation
and distance. See p.44 “Shift”.