Ricoh 240w 用户指南
DRAFT 2003/11/12
9
1. Basics
Original and Copy Output Locations
Original Output Locations
The following original output loca-
tions are available:
tions are available:
❖
❖
❖
❖ Original Upper Output
This is the basic original output lo-
cation. Originals are ejected onto
the upper output stacker.
cation. Originals are ejected onto
the upper output stacker.
Note
❒ If the original is thicker than
157g/m
2
(41.8 lb.), select origi-
nal rear output.
❖
❖
❖
❖ Original Rear Output
Originals are ejected onto the orig-
inal output supports. When copy-
ing thick or hard originals, select
this output location.
inal output supports. When copy-
ing thick or hard originals, select
this output location.
Original upper output
AAAA
Check the upper output guide
and original exit switching lever
at the machine's center rear are
both raised.
and original exit switching lever
at the machine's center rear are
both raised.
1.
Upper output guide
2.
Original exit switching lever
Note
❒ Remove the ejected original af-
ter it is ejected by holding its
leading edge.
leading edge.
Original rear output
Note
❒ When original rear output is set as
the original output location, the
copy output location is automati-
cally set to lower output.
copy output location is automati-
cally set to lower output.
AAAA
Remove the upper output stacker.
2
1
AAJ547S
AAJ502S