Ricoh 240w 用户指南
DRAFT 2003/11/12
Copier Functions
33
2
Reference
p.26 “Copying from the Bypass
Tray”
Related default settings:
p.85 “APS Priority”
p.85 “Ppr.Tray Priority”
p.26 “Copying from the Bypass
Tray”
Related default settings:
p.85 “APS Priority”
p.85 “Ppr.Tray Priority”
Auto paper select
AAAA
Make sure [Auto] is selected.
Note
❒ When [Auto] is not selected, se-
lect [Auto] using the
01 keys.
Manual paper select
AAAA
Select paper roll tray 1, paper roll
tray 2, cut paper, or bypass tray
using the
tray 2, cut paper, or bypass tray
using the
0
0
0
01
1
1
1 keys.
The display of the selected tray is
highlighted.
highlighted.
-
-
-
-Rotate Copy
If the original's width is different to
that of the paper set in the paper roll
tray, or the original's orientation (
that of the paper set in the paper roll
tray, or the original's orientation (
K
or
L ) is different to that of the paper
set in the bypass tray, this function ro-
tates the original image by 90 degrees,
to fit it onto the copy paper.
tates the original image by 90 degrees,
to fit it onto the copy paper.
Note
❒ This function works when Auto
Paper Select or Auto Reduce/En-
large is selected. See p.32 “Select-
ing Copy Paper” and p.39 “Auto
Reduce/Enlarge”.
large is selected. See p.32 “Select-
ing Copy Paper” and p.39 “Auto
Reduce/Enlarge”.
❒ Rotate Copy in APS default setting
is [On]. You cannot use Rotate
Copy if this setting is changed to
[Off]
Copy if this setting is changed to
[Off]
❒ You cannot use Rotate Copy when
enlarging onto A0 (E) size paper.
To do this, place originals in the
To do this, place originals in the
K
orientation.
Setting the Length of Copy
Paper Cut
Paper Cut
Preparation
The following paper cut methods
are available.
The following paper cut methods
are available.
❖
❖
❖
❖ Synchro Cut
Cuts the paper at the same
length as the original.
length as the original.
GCROTA0E