Ricoh 240w 用户指南
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
DRAFT 2003/11/12
69
3. Troubleshooting
If Your Machine Does Not Operate As You
Want
Want
When a Message Appears
The following chart contains explanations of common messages. If other mes-
sages appear, follow the instructions displayed.
sages appear, follow the instructions displayed.
Note
❒ Service Call messages contain a contact phone number and your machine
number.
Message
Problem/Causes
Solutions
Please wait.
The main power has just been
turned on, paper type (plain
paper/translucent pa-
per/film) was changed, or the
machine is otherwise getting
ready.
turned on, paper type (plain
paper/translucent pa-
per/film) was changed, or the
machine is otherwise getting
ready.
Wait for the machine to fully
warm-up.
warm-up.
Note
❒ When the “
Ready
” mes-
sage appears, you can
make the settings for your
copies and scan your origi-
nals. After the originals
have been scanned, the
machine will automatical-
ly start copying after it has
warmed-up. See p.86
“Copy Start Method”.
make the settings for your
copies and scan your origi-
nals. After the originals
have been scanned, the
machine will automatical-
ly start copying after it has
warmed-up. See p.86
“Copy Start Method”.
Loading toner...
Please wait.
The machine is getting ready
after loading toner.
after loading toner.
Check original size
An improper original is set.
Select paper manually, do not
use Auto Paper Select.
use Auto Paper Select.
Set original length-
wise
In User Auto Reduce/En-
large, the original is set to
large, the original is set to
L.
For User Auto Reduce/En-
large, set the original to
large, set the original to
K.
Set original side-
ways
In User Auto Reduce/En-
large, the original is set to
large, the original is set to
K.
For User Auto Reduce/En-
large, set the original to
large, set the original to
L.
Memory is full.
Cannot scan.
The machine's memory is full
due to scanning originals or
performing a function. The
number of originals that can
be stored in memory depends
on the size of originals and
function settings.
due to scanning originals or
performing a function. The
number of originals that can
be stored in memory depends
on the size of originals and
function settings.
• When Sort is selected,
press [Exit] to copy
scanned originals, and
then copy remaining origi-
nals.
scanned originals, and
then copy remaining origi-
nals.
• When the Job Preset func-
tion is selected, check the
number of preset jobs, and
then try scanning the orig-
inals again.
number of preset jobs, and
then try scanning the orig-
inals again.