Ricoh 240w 用户指南
DRAFT 2003/11/12
Troubleshooting
72
3
If You Cannot Make Clear Copies
Problem
Causes
Solutions
Black or white streaks appear
on copies.
on copies.
Image density is too dark.
Adjust image density. See p.30
“Adjusting Copy Image Den-
sity”.
“Adjusting Copy Image Den-
sity”.
The exposure glass or platen
plate is dirty.
plate is dirty.
Clean the exposure glass or
platen plate. See “Maintaining
Your Machine”, General Set-
tings Guide.
platen plate. See “Maintaining
Your Machine”, General Set-
tings Guide.
The original is dusty.
Clean the original and try cop-
ying again.
ying again.
Be particularly careful when
using the following types of
original:
using the following types of
original:
• Hand drawn or drawn on
with other forms of pencil
or pen, such as a plotter.
or pen, such as a plotter.
• Film, translucent paper, or
other originals that attract
static electricity.
static electricity.
• Very long originals.
A shadow of the reverse side
of an original image appears
on copies.
of an original image appears
on copies.
Image density is too dark.
Adjust the image density set-
ting. See p.30 “Adjusting
Copy Image Density”.
ting. See p.30 “Adjusting
Copy Image Density”.
The background is dirty.
Image density is too dark.
Adjust the image density set-
ting. See p.30 “Adjusting
Copy Image Density”.
ting. See p.30 “Adjusting
Copy Image Density”.
The edges of pasted sections
are shown.
are shown.
Image density is too dark.
Adjust the image density set-
ting. See p.30 “Adjusting
Copy Image Density”.
ting. See p.30 “Adjusting
Copy Image Density”.
Change the orientation of the
original.
original.
Put mending tape on the past-
ed part.
ed part.
The same copy area is dirty
whenever making copies.
whenever making copies.
The exposure glass or platen
plate is dirty.
plate is dirty.
Clean the exposure glass or
platen plate. See “Maintaining
Your Machine”, General Set-
tings Guide.
platen plate. See “Maintaining
Your Machine”, General Set-
tings Guide.