Ricoh is01 用户指南
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
SETTING UP THE SCANNER
1-4
SCANNER LOCATION
Before actually setting up the scanner, take a few minutes to consider where you
plan to use it. Remember the following points when doing this.
plan to use it. Remember the following points when doing this.
❐
Set up the scanner in an easily
accessible area with temperatures
between 50 and 90 degrees
Fahrenheit (10 to 32 degrees
Celsius) with a relative humidity of
20 to 80 percent.
accessible area with temperatures
between 50 and 90 degrees
Fahrenheit (10 to 32 degrees
Celsius) with a relative humidity of
20 to 80 percent.
❐
Make sure that the scanner is in
an area with a minimum clearance
of 600 mm (24”) above, 30 mm
(1”) on each side, 50 mm (2”) in
the rear, and a comfortable
working area in the front.
an area with a minimum clearance
of 600 mm (24”) above, 30 mm
(1”) on each side, 50 mm (2”) in
the rear, and a comfortable
working area in the front.
❐
Place the scanner on a level,
stable, vibrating-free surface.
stable, vibrating-free surface.
❐
Place the scanner in an area that
is not exposed to large amounts of
dust and direct sunlight.
is not exposed to large amounts of
dust and direct sunlight.
❐
Do not place items on top of the
scanner.
scanner.
more
than
600mm
(24")
than
600mm
(24")
CAUTION: Do not place the scanner directly below an air
conditioning or heating vent. Sudden temperature
changes can cause condensation within the scanner.
changes can cause condensation within the scanner.
Note: For the unpacking and installation of the scanner, refer to the installation
procedure sheet.