Ricoh 480W 参考指南

 JOB 

EDITOR 

To add an entry using the right-hand mouse button, proceed as 
follows: 

1.  Mark an entry in the entry list before or after which the new 

entry is to be inserted. 
If you do mark an entry, new entries are always inserted at 
the end of the list. 

2.  Keep the mouse cursor on the entry list and click the right-

hand mouse button. The following commands are offered: 
Delete, Insert, Add. 

3. If the new entry is to be inserted in front of the marked 

entry, select "Insert". If the new entry is to be inserted after 
it, choose "Add". 

The program opens a file selection window. 

4. Select the required file, which has one of the above file 

formats and confirm with "OK". As in Windows Explorer, 
you can now mark several files to insert lots of drawings in 
one go. 

To add an entry using Drag & Drop, proceed as follows: 

1.  Open Windows Explorer and arrange the two windows of 

RW-480 PLOTBASE and Explorer so that thy are positioned 
next to each other or on top of each other. 

2.  Mark an entry from the RW-480 PLOTBASE to be inserted 

after the new entry. 
If you want to insert a new entry in front of an existing 
entry, mark the entry in the entry list before the existing 
entry. 

If you do not mark any entry, new entries will always be 
inserted at the end of the list. 

3.  Change to the folder in Explorer that contains the file entry 

that you want to add as the new entry. 

4.  Click on the required file with the left-hand mouse button 

and while holding the mouse button pressed down, drag 

 

RW-480 PLOTBASE    109