Ricoh 480W 参考指南
PRINT JOB
Print job
The following chapters explain how you can manually or
automatically plot an order. It also explains how jobs can be
interrupted or deleted.
automatically plot an order. It also explains how jobs can be
interrupted or deleted.
Attention: If you want to use the bypass tray, please
use the following procedure: Start the print job first!
Wait until the program tells you to insert the medium in
Wait until the program tells you to insert the medium in
the bypass tray. The plotter will not print if you proceed
the other way round. More detailed information about
the procedure is available on page 83.
the other way round. More detailed information about
the procedure is available on page 83.
Set plot mode
There are two types of program sequence to choose from for
the plot mode. Either you let the program run in "Autoplot"
mode or you yourself ensure that the jobs are sent to the Plotter.
However only one of the two operating modes is possible:
mode or you yourself ensure that the jobs are sent to the Plotter.
However only one of the two operating modes is possible:
Note: As long as you run RW-480 PLOTBASE in
"Autoplot" mode, you cannot send individual jobs to
the printer manually using the "Job - Plot" menu item.
Bypass tray (manual) is only possible of the "Autoplot"
mode is not active.
the printer manually using the "Job - Plot" menu item.
Bypass tray (manual) is only possible of the "Autoplot"
mode is not active.
Automatic plot mode
In the active Autoplot mode, jobs with the "ready" status are
automatically processed and sent to the plotter. The sequence in
which the jobs are processed depends on the priority of the
jobs. If the jobs have the same priority, the job number is taken
into consideration. Even when the Autoplot print mode is active,
automatically processed and sent to the plotter. The sequence in
which the jobs are processed depends on the priority of the
jobs. If the jobs have the same priority, the job number is taken
into consideration. Even when the Autoplot print mode is active,
"Problem jobs" marked in red, jobs with the "Wait" priority or
jobs marked in blue needing the user to do something, are not
printed automatically.
jobs marked in blue needing the user to do something, are not
printed automatically.
134 RW-480 PLOTBASE