Ricoh 480W 参考指南
PREPARE
PRINT
JOBS
Prepare print jobs
This program enables you to scan in and plot individual
drawings or even whole sets of drawings. You can scan in any
number of drawings one after the other, have them
drawings or even whole sets of drawings. You can scan in any
number of drawings one after the other, have them
automatically entered in the job editor and set this as a job
order. Apart from the automatically collated job list, you can
also produce a set of drawings yourself. The latter procedure
has the advantage that you can edit the individual drawings
order. Apart from the automatically collated job list, you can
also produce a set of drawings yourself. The latter procedure
has the advantage that you can edit the individual drawings
again with the drawing editor before assigning them to the job
order. This chapter describes how to produce sets of drawings
for a job order.
order. This chapter describes how to produce sets of drawings
for a job order.
Note: The terms Job, Entry, etc. used in this chapter
are explained in the chapter "Naming conventions",
page 38.
page 38.
When allocating a drawing to a job order manually and
automatically, most of the steps involved are similar.
automatically, most of the steps involved are similar.
Nevertheless they are described in two sections to ensure clarity.
The following describes automatic allocation. If you want to
allocate a drawing manually, please refer to page 183.
allocate a drawing manually, please refer to page 183.
Allocate drawings automatically
1. When first starting the program, the job editor opens with
the job that you last edited. If you do not want to edit it any
more, you must first close it by clicking on the following
button:
button:
2. To open a existing set of drawings or to create a new one,
click on the same button which has changed its
appearance:
RW-480 PLOTBASE 179