Ricoh 480W 参考指南

 DRAWING 

EDITOR 

 

In the top block you can undo the last commands. Your last 
commands are listed in the lower block. 

Before you begin with the actual work, it may be necessary for 
you to align the drawing first because it has slipped during the 

scan. Sometimes a drawing also has contaminations, which 
should be removed.  

•  Deskew 

A slipped drawing is very easy to align. Simply select 
"Deskew" from the "Image" menu or the corresponding 
button from the menu bar: 

 

You can now set the mouse at any point on the drawing and 
drag the mouse in the required direction. The program 
aligns the drawing along this "mouse line". 

Note: If the drawing is very large and/or complex and 

its display requires a large memory space, the aligning 
can take somewhat longer. In such a case the program 

gives you a corresponding message and you can 
cancel this function. 

•  Despeckle 

If the drawing is contaminated after the scan, you can 
remove it with a filter. Select "Despeckle" from the "Image" 
menu or the relevant button from the menu bar:  

 

RW-480 PLOTBASE    192