Ricoh 480W 参考指南
DRAWING
EDITOR
• Enlarge a position about the center
• Enlarge a section defined with the mouse
• Successively enlarge section
• Successively reduce section
• Return to zoom extents
• Switch to view 1:1
• Zoom drawing to side width
• Zoom drawing to side height
• Rotate drawing 90° counter-clockwise
• Rotate drawing 90° clockwise
• Rotate drawing 180°
• Mirror horizontally
• Mirror vertically
The last five buttons refer to rotate and mirror. These
commands change the view and position of the drawing, but
they also change the whole drawing. When closing the drawing,
the program therefore asks whether the changes should be
commands change the view and position of the drawing, but
they also change the whole drawing. When closing the drawing,
the program therefore asks whether the changes should be
saved.
Use of the buttons is easy: apart from the two magnifying
glasses, you only have to click on the required button and the
command is executed directly.
glasses, you only have to click on the required button and the
command is executed directly.
: If you want to enlarge a position about the center, click on
the first magnifying glass from the left and then on the required
position in the drawing. The program enlarges by one step and
places the position concerned in the center of the screen.
position in the drawing. The program enlarges by one step and
places the position concerned in the center of the screen.
: To enlarge a certain section, first click on the second
magnifying glass from the left and then drag a rectangle of any
size at the required position on the drawing. The program
enlarges the section enclosed by the rectangle by one step. You
can enlarge a section as often as you like without having to click
on the magnifying glass again.
enlarges the section enclosed by the rectangle by one step. You
can enlarge a section as often as you like without having to click
on the magnifying glass again.
Insert text
If you want to insert text into the drawing, you can either open
RW-480 PLOTBASE 196