Ricoh 480W 参考指南
SYSTEM
REQUIREMENTS
System requirements
Please read through the following recommendations carefully.
They can be very helpful in finding the optimum hardware for
your needs.
They can be very helpful in finding the optimum hardware for
your needs.
• Operating system:
Microsoft Windows XP Professional, ServicePack 2
Microsoft Windows 2000 Professional, ServicePack 4
Microsoft Internet Explorer 5.0 or higher
Microsoft Windows 2000 Professional, ServicePack 4
Microsoft Internet Explorer 5.0 or higher
• Processor:
Intel Pentium 4, Pentium III, Celeron with min. 2 GHz
AMD Athlon (min. Athlon XP)
AMD Athlon (min. Athlon XP)
Recommended Intel Pentium 4 with 2 GHz or more
• Front Side Bus:
Intel Pentium 4, Pentium III, Celeron with min. 400 MHz
AMD Athlon with min. 200 MHz
Recommended Intel Pentium 4 with 400 MHz or more
AMD Athlon with min. 200 MHz
Recommended Intel Pentium 4 with 400 MHz or more
• PCI Bus:
The PCI bus system must meet up-to-date standards (PCI 2.0
or higher – 3.3 V or 5 V autoadaptive, maximum load 5 A).
If your computer does not fulfill this standard, it is possible
that the plotter controller will not be identified.
If your computer does not fulfill this standard, it is possible
that the plotter controller will not be identified.
• System memory:
We recommend the following system memory rated to the
maximum scan and plot length:
MB RAM in PC
MB RAM in PC
recommended maximum scan length
0
256 MB
0
3000 mm
0
512 MB
0
6000 mm
0
768 MB
0
8000 mm
1024 MB
10000 mm
1536 MB
15000 mm
1536 MB+
15000 mm
• Hard drive:
The hard disk should have at least 10 GB free memory.
• Network interface/Configuration:
10/100 Base T Ethernet, the TCP/IP configuration is
RW-480 PLOTBASE 20