Ricoh 480W 参考指南

 SETTINGS 

AFTER 

INSTALLATION

 

If you want to send print jobs to RW-480 PLOTBASE with the ftp 
command, you must set up an FTP standard directory. You must 
also check the spool path entry for RW-480 WINPRINT which 

has just been installed. 
The settings are nearly identical for the two operating systems 
"XP" and "2000" so that they are described in one chapter. 
Reference is made accordingly to possible differences. 

You need the FTP default directory as spool directory if you want 
to send print jobs to RW-480 PLOTBASE with the ftp command.  
This setting should only be adjusted after installation of RW-480 
PLOTBASE and RW-480 SCANTOOL - proceed as follows: 
1.  Open the "Start" bar and use the context menu to go to "My 

Computer" [XP] / Open the context menu at "My Computer" 
on the desktop [2000]. 

2.  Select the context menu point "Manage", then double click 

on the option "Services and Applications". 

3.  Double click on "Internet Information Services" and then 

open the context menu at "FTP sites". 

4.  Select the context menu item "Properties" and change to the 

tab "Home Directory". 

5.  Activate the option "A directory located on this computer"; 

enter the "Local path" under the "Directory of the FTP site" - 
here the spool directory "[drive]:\spool". 

6.  Also activate the option "write" and "UNIX", then confirm 

with "OK". 

After installation of RW-480 WINPRINT, you must check whether 

the spool path is correctly adjusted as follows: 
1.  Open the list of connected printers in "Start - Printers and 

fax machines" [XP] / "Start - Settings - Printers" [2000]. 

2.  Mark the printer driver "RW-480WP" and open the menu 

point "Properties" in the context menu. 

 

RW-480 PLOTBASE    29